Each occurrence, Each occurrence -11, Figure 3-9 calendar selection, start date – Comtech EF Data Vipersat Circuit Scheduler v3.7.x ArrangeLink User Manual
Page 53
Advertising
Chapter
3 -
Using ArrangeLink
3-11
Schedule Setup
shown in figure 3-9. Use the calendar to select the desired date for the event,
which will then appear in the box.
Note that only the Start Date field appears when the schedule type is set to One
Time Only.
Figure 3-9 Calendar Selection, Start Date
Each Occurrence
In this section of the screen, the Start Time and Duration of the event are spec-
ified. From the drop-down list boxes shown in figure 3-10, select the Start Time
hour, minute, and AM or PM for the scheduled event.
Advertising