Comtech EF Data Vipersat Circuit Scheduler v3.7.x ArrangeLink - Manual (Page 60)

Schedule Setup
3-18 ArrangeLink User Guide
Note: Notice in figure 3-18 that all of the Out-of-Band devices have been
suppressed and only InBand devices are shown as available for this
scheduled event.
Figure 3-18 Point-to-Point InBand Circuit, Point One
To set up the scheduled event, select the Point One and Point Two sites as
follows:
1. Select the Point One device to be used from the network tree by clicking in
the box next to the Remote site icon, as shown in the figure.
2. Click the From Treeview item under the Point One box. The selected site
will automatically be entered in the Point One box, as shown in figure 3-19.
3. Select Point Two by selecting the second Remote site from the network tree.
4. Click the From Treeview under the Point Two box to automatically enter
the second site into the Point Two box, as shown in figure 3-19.
NOTE