Comtech EF Data Vipersat Circuit Scheduler v3.7.x ArrangeLink - Manual (Page 64)

Schedule Setup
3-22 ArrangeLink User Guide
1. Select the Upstream Switch Circuit Type radio button, as shown in
figure 3-23.
Figure 3-23 Upstream Switch, Remote Selection
2. Select the Remote site to be switched for this event from the network tree
view.
3. Click the From Treeview button to transfer the selected site to the Remote
box.
4. The identification parameters are displayed in the Remote box and stored in
the database for this event.
When configuration of the Circuit Specific Options is completed, click on the
Continue button to proceed to the Advanced Switching tab.
Advanced Switching
The fourth Schedule Setup sub-screen, Advanced Switching, presents the carrier
channel Mod/Code settings to be used by the scheduled event. Clicking the