Foxconn Q67M-S - Manual (Page 108)

5
101
5. After some files are copied to your system, the following picture appears, press <S>
to continue the specific driver installation.
6. It will ask you to insert the RAID driver diskette into you floppy drive. Press <Enter>
after it is done.
Windows Setup
Please insert the disk la�eled
manufacturer-supplied hardware support disk
into Drive A:
* Press ENTER when ready
ENTER=Continue ESC=Cancel F3=Exit
Windows Setup
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage device(s):
<none>
* To specify additional SCSI adapters, CD-ROM drivers, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storage device
manufacturer, press S.
* If you do not have any device support disks from a mass storage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.
S=Specify Additional Device ENTER=Continue F3=Exit