Foxconn Q67M-S - Manual (Page 19)

2
12
Installing a Memory
If you take a look at front side of memory module, it has asymmetric pin counts on �oth sides sepa-
rated by a notch in the middle, so it can only fit in one direction. Follow the steps below to correctly
install your memory modules into the sockets.
Step 1:
Spread the clips at �oth ends of the memory socket.
Place the memory module onto the socket, then put
your fingers on top edge of the module, and push
it down firmly and seat it vertically into the memory
socket.
Step 2:
The clips at �oth ends of the socket will snap into
place when the memory module is securely insert-
ed.
Notch
Before installing a memory module, make sure to turn off the computer and unplug the Before installing a memory module, make sure to turn off the computer and unplug the
power cord from the power outlet to prevent damage to the memory module. Be sure
to install DDR3 DIMMs on this mother�oard.
CA
UT
IO
N
!
9�
-Pin
144-Pin