Foxconn Q67M-S - Manual (Page 34)

3
27
► EIST Function
You can select the EIST (Processor Power Management, PPM) through this item.
Enhanced Intel SpeedStep® technology (EIST) allows the system to dynamically
adjust processor voltage and core frequency, which can result in decreased average
power consumption and decreased average heat production. There are some system
requirements must �e met, including CPU, chipset, mother�oard, BIOS and operation
system. Please refer to Intel We�site for more information.
CA
UT
IO
N
!
► Turbo Mode
Turbo mode allows processor cores to run faster than its marked frequency in specific condi-
tion. It appears only when the “EIST” is ena�led.
appears only when the “EIST” is ena�led. only when the “EIST” is ena�led.
► 1-Core/2-Core/3-Core/4-Core Ratio Limit
When the “Turbo Mode” is enabled, this limit is for 1/2/3/4 core active. 0 means using the fac-
tory-configured value.
SATA Configuration
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
SATA Configuration
SATA Mode [I�E Mode]
SATA Port1 Not Present
SATA Port2 W�C W�1600AAJS (160.0
SATA Port3 Not Present
SATA Port4 Not Present
SATA Port5 Not Present
E-SATA Port Not Present
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized �efaults
F4: Save & Exit
ESC: Exit
(1) I�E Mode. (2) AHCI Mode.
(3) RAI� Mode.
Advanced
► SATA Mode
This item is used to set the operating mode of your SATA ports. Setting options: [IDE Mode];
[AHCI Mode]; [RAID Mode].