Foxconn Q67M-S - Manual (Page 80)

5
�3
9. Check if the diskette contains the driver files.
Later, when in the process of installing Windows XP in your RAID system, it will ask you
to use this floppy diskette to provide driver for additional specific devices, for example,
a RAID device.
10. Install Serial ATA Hard Disks :
10-1. Shut down your computer.
10-2. Install SATA hard disks into the drive bays, connect all power and SATA
ca�les.
�. You can input a volume la�el for this diskette, click
on "Start" to format.
7.Click on "OK" to go through this warning
message.
8. Format finished. Click "OK" to continue copying of
RAID driver into this diskette.