Foxconn Q67M-S - Manual (Page 32)

3
25
► Memory Voltage
This item is used to change the memeory voltage in a step of 12.5mV. The voltage can be
incremented from +12.5mV to +500.0mV.
Trusted Computing
► TPM SUPPORT
This item is used to decide whether to support TPM (Trusted Platform Module) device func-
tion. Default option is [Disabled]. If you want to support TPM, first you need to install a TPM
device on the mother�oard and set this item to [Ena�led], then save changing and reset your
computer, otherwise the operation system can not show the relative information.
CPU Configuration
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
CPU Configuration
Genuine Intel(R) CPU 0 @ 2.40GHz
EMT64
Supported
Max Processor Speed 2400 MHz
Min Processor Speed 1600 MHz
Processor Speed 2400 MHz
CPU I� 206a2
Microcode Revision 26
Processor Cores 2
Intel HT Technology Supported
C1E Support [Enabled]
Hyper-threading [Enabled]
Execute �isable Bit [Enabled]
Intel Virtualization Technology [�isabled]
CPU C6 Report [Enabled]
Package C State limit [No Limit]
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized �efaults
F4: Save & Exit
ESC: Exit
Advanced
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
TPM Configuration
TPM SUPPORT [�isabled]
Current TPM Status Information
NO TPM Hardware
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized �efaults
F4: Save & Exit
ESC: Exit
Enable or �isable TPM
support. O.S. will not show
TPM. Reset of platform is
required.
Advanced