Foxconn Q67M-S - Manual (Page 17)

2
10
Install the CPU Cooler
Follow the steps �elow to correctly install the CPU cooler on the mother�oard.
1. Apply and spread an even ther-
mal grease on the surface of CPU. 2. Place the four bolts of the CPU
cooler to the holes of the mother-
�oard, push them straight down from
the top, and the �olts will �e fastened
on the mother�oard. That's it.
3. Check the solder side of the
mother�oard, the push pin should
be fixed as depicted in the picture.
3
2
1
4. Attach the 4-wire CPU cooler
connector to the CPU FAN header
on the mother�oard .
Release bolts of CPU cooler from
motherboard :
1.Turning the push pin (�olt) along
with the direction of arrow (coun-
terclockwise).
2. Pull the push pin straight up.
3. Turning push pin clockwise to its
default position.
Use extreme care when removing the CPU cooler �ecause the thermal grease may
adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.
C
AU
TI
O
N !