Foxconn Q67M-S - Manual (Page 62)

4
55
4.5 Limit Setting - FAN1 Fan
This page lets you to set FAN1 fan low limit rpm and ena�le the alert function.
5. Voltage Page - Voltage Control (Optional)
This page lets you set CPU voltage, memory voltage and North Bridge voltage
manually. CPU voltage can be stepped up/down by a unit of 12.5mV, while memory is
0.05V/step, and North Bridge is 0.04V/step.
Set low limit rpm �y
dragging the lever
Show current FAN1
fan rpm value
Ena�le alert function
when the FAN1 fan
runs slower than low
limit rpm value
Show current low limit
rpm value of FAN1 fan
Go to Voltage page
Select the option
you want to set
Adjust �y manual
Reset the changes Apply the changes