Foxconn Q67M-S User Manual
Page 97
5
90
�. Use Up or Down arrow key to select the desired strip size when entering “
Strip
Size” menu. The default value is 64K. Press <Enter>.
�. In “
Capacity” item, use the default value, and press <Enter>. The default value is
twice that of the smallest hard disk size, that is, 74.5GB * 2 = 149GB.
8. Select “
Create Volume” and press <Enter>. A warning message will appear :
Press <Y> to create the volume and return to the main menu.
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume ? (Y/N) :
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
The following are typical values:
RAID0 - 128KB
RAID10 - 64KB
RAID5 - 64KB
Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
TryRAID5
RAID5(Parity)
Select Disks
128K
149.1 GB
N/A
Create Volume
[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
[
HELP
]
64KB
[
CREATE VOLUME MENU
]
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
1. Create RAID Volume
3. Reset Disks to Non-RAID
2. Delete RAID Volume
4. Recover Volume Options
5. Exit
RAID Volume :
ID
Name
Level Stripe
Size Status Boota�le
0
TryRAID5
RAID5(Parity)
64KB 149.1GB
0
TryRAID5
RAID5(Parity) 64KB 149.1GB
Normal
Yes
Physical Disks:
Port Drive Model
Serial #
Size Type/Status(Vol ID)
0
Hitachi HDS72161
PVF904�21G2J�M
149.0GB
Hitachi HDS72161
PVF904�21G2J�M
149.0GB
PVF904�21G2J�M
149.0GB
Member Disk(0)
1
ST380811AS
5PS1TAGW
74.5GB
Member Disk(0)
2
SAMSUNG HD1�1HJ S0V3J9APA30524
149.0GB
S0V3J9APA30524
149.0GB
149.0GB
Member Disk(0)
3
ST380815AS
5RW1CA37
74.5GB
Non-RAID Disk
Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
[
DISK/VOLUME INFORMATION
]
[
MAIN MENU
]
1. Create RAID Volume
[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu