Cruise control light, Information displays, Driver information center (dic) – Hummer 2010 H3 User Manual

Page 132: Displays -18, Cruise control, Cruise control light -18, Driver information, Center (dic) -18

Advertising
background image

5-18

Instruments and Controls

Cruise Control Light

This light comes on whenever the
cruise control is set.

The light goes out when the cruise
control is turned off. See Cruise
Control on page 9‑57
for more
information.

Information Displays

Driver Information
Center (DIC)

The Driver Information Center (DIC)
displays information such as the trip
odometer, personalization features,
and warning messages. The DIC
display is located on the instrument
panel cluster.

The DIC comes on when the ignition
is on.

If a problem is detected, a warning
message appears on the display.
Pressing and releasing the trip
odometer reset stem on the DIC
acknowledges some current
warnings or service messages.
Some messages only clear after the
required action has been taken.

The DIC has different modes which
can be accessed by pressing the
trip odometer reset stem on the DIC.
These modes are explained in the
following section. The DIC trip
odometer reset stem is located on

the instrument panel cluster next to
the DIC display. To scroll through
the available functions, press and
release the reset stem.

Trip Information

Odometer

The odometer is automatically
displayed on the DIC when you start
the vehicle. The odometer shows
the total distance the vehicle has
been driven in either miles for the
United States or kilometers for
Canada.

Trip Odometer

Press and release the reset stem
until TRIP appears on the DIC
display. The trip odometer shows
the current distance traveled since
the last reset of the trip odometer in
either miles for the United States or
kilometers for Canada.

To reset the trip odometer, press
and hold the reset stem until the
display returns to zero.

Advertising