Hummer 2010 H3 - Manual (Page 99)

Seats and Restraints 3-55
H3T Models
1. If the child restraint manufacturer
recommends that the top tether
be attached, attach and tighten
the top tether to the top tether
anchor (A), if equipped. Refer to
the child restraint instructions
and the following steps:
1.1. Put the child restraint on
the seat.
1.2. Pull the seatback forward
to access the top tether
anchors (A). See Rear
Seats (H3) on page 3‑7
or Rear Seats (H3T) on
page 3‑9 for additional
information.
1.3. Route the top tether
according to the child
restraint instructions and
the following instructions:
If the position you are using
does not have a headrest
or head restraint and you
are using a single tether,
route the tether over the
seatback.
If the position you are using
does not have a headrest
or head restraint and you
are using a dual tether,
route the tether over the
seatback.