Engine cooling system messages, Engine oil messages, Engine power messages – Hummer 2010 H3 User Manual

Page 137: Engine cooling system, Messages -23, Engine oil messages -23 engine power messages -23

Advertising
background image

Instruments and Controls

5-23

Engine Cooling System
Messages

AC (Air Conditioning) OFF

This message displays when the
engine coolant temperature is too
high and the air conditioning in
the vehicle needs to be turned off.
See Engine Overheating on
page 10‑22
and Climate Control
Systems on page 8‑1
for more
information. This message displays
along with the ENG HOT message.

ENG (Engine) HOT

This message displays when the
engine coolant temperature is
hot. Check the engine coolant
temperature gauge. See Engine
Coolant Temperature Gauge on
page 5‑9
.
Have the vehicle
serviced by your dealer as soon
as possible if you suspect the
engine is overheating. See Engine
Overheating on page 10‑22
for more
information.

Engine Oil Messages

CHANGE OIL

This message displays when the
oil needs to be changed. Check
the oil in the vehicle as soon as
possible and have the vehicle
serviced by your dealer. See Engine
Oil on page 10‑9
and Scheduled
Maintenance on page 11‑2
for
more information. Press and release
the reset stem to acknowledge the
message and clear it from the
display.

OIL

This message displays when the oil
pressure is low. See Engine Oil
Pressure Light on page 5‑17
and
Engine Oil on page 10‑9 for more
information.

Engine Power Messages

REDUCED POWER

This message displays when the
vehicle's engine power is reduced.
Reduced engine power can affect
the vehicle's ability to accelerate.
If this message is on, but there
is no reduction in performance,
proceed to your destination.
The performance may be reduced
the next time the vehicle is driven.
The vehicle may be driven at a
reduced speed while this message
is on, but acceleration and speed
may be reduced. Anytime this
message stays on, the vehicle
should be taken to your dealer
for service as soon as possible.
Press and release the reset stem
to acknowledge the message and
clear it from the display.

Advertising