Hummer 2010 H3 - Manual (Page 343)

Vehicle Care 10-77
2. Remove the center cap,
if equipped, by placing the flat
end of the wheel wrench in the
slot on the wheel and gently pry
the center cap out.
3. Use the wheel wrench to remove
the wheel nuts securing the
spare tire.
If the vehicle has locking lug
nuts, the key is supplied in the
tool bag. Use the key along with
the wheel wrench to remove the
wheel nuts from the tire.
4. You may need assistance to
remove the spare tire. Pull off
and gently lower the spare tire to
the ground. Set it next to the
flat tire.
Removing the Flat Tire and
Installing the Spare Tire
1. Do a safety check before
proceeding. See If a Tire Goes
Flat on page 10‑64 for more
information.
2. Remove the center cap by
placing the flat end of the wheel
wrench in the slot on the wheel
and gently pry the center
cap out.