Driving and operating 9-71 – Hummer 2010 H3 User Manual

Page 255

Advertising
background image

Driving and Operating

9-71

With the added weight, the engine,
transmission, wheel assemblies and
tires are forced to work harder and
under greater loads. The trailer also
adds wind resistance, increasing
the pulling requirements. For safe
trailering, correctly use the proper
trailering equipment.

The following information has
important trailering tips and rules
for your safety and that of your
passengers. Read this section
carefully before pulling a trailer.

Pulling A Trailer

Here are some important points:

.

There are many laws, including
speed limit restrictions that apply
to trailering. Check for legal
requirements with state or
provincial police.

.

Consider using a sway control.
See “Hitches” later in this
section.

.

Do not tow a trailer at all during
the first 800 km (500 miles) the
new vehicle is driven. The
engine, axle or other parts could
be damaged.

.

Then, during the first 800 km
(500 miles) that a trailer is
towed, do not drive over 80 km/h
(50 mph) and do not make starts
at full throttle. This helps the
engine and other parts of the
vehicle wear in at the heavier
loads.

.

Vehicles with an automatic
transmission can tow in
D (Drive). Use a lower gear if
the transmission shifts too often.
For vehicles with a manual
transmission, it is better not to
use the highest gear.

.

This vehicle has a Hill Start
Assist feature, which may be
useful when the vehicle is
stopped on a grade. See Hill
Start Assist (HSA) on page 9‑52
for more information.

.

Do not drive faster than the
maximum posted speed for
trailers.

Driving with a Trailer

Towing a trailer requires experience.
Get familiar with handling and
braking with the added trailer
weight. The vehicle is now longer
and not as responsive as the
vehicle is by itself.

Check all trailer hitch parts and
attachments, safety chains,
electrical connectors, lamps, tires
and mirror adjustments. If the trailer
has electric brakes, start the vehicle
and trailer moving and then apply
the trailer brake controller by hand
to be sure the brakes are working.

During the trip, check occasionally
to be sure that the load is secure,
and the lamps and trailer brakes are
working properly.

Advertising