Immobilizer operation (canada), Immobilizer operation, Canada) -11 – Hummer 2010 H3 User Manual

Page 37: Keys, doors and windows 2-11

Advertising
background image

Keys, Doors and Windows

2-11

If the engine stalls and the security
light flashes, wait about 10 minutes
until the light stops flashing before
trying to restart the engine. Release
the key from START as soon as the
engine starts.

If the engine does not start after
three tries, the vehicle needs
service.

If the engine is running and the
security light comes on, the engine
restarts if you turn the engine off.
However, the Passlock system is
not working properly and must be
serviced by your dealer. The vehicle
is not protected by Passlock at this
time. See your dealer for service.

In an emergency, call the Roadside
Assistance Center. See Roadside
Service on page 13‑5
.

Do not leave the key or device that
disarms or deactivates the theft
deterrent system in the vehicle.

Immobilizer Operation
(Canada)

This vehicle has a passive
theft-deterrent system.

The system is automatically armed
when the key is removed from the
ignition.

The system is automatically
disarmed when the key is turned
to ON/RUN.

You do not have to manually arm or
disarm the system.

The security light comes on if
there is a problem with arming or
disarming the theft-deterrent
system.

The key uses a transponder that
matches an immobilizer control unit
in the vehicle. Only the correct key
starts the vehicle. If the key is ever
damaged, the vehicle may not start.

When trying to start the vehicle,
if the engine does not start and the
security light comes on, there may
be a problem with the theft-deterrent
system. Turn the ignition off and try
again.

Advertising