JLCooper Eclipse Ethernet 2.6 for OSX - Manual (Page 10)

Introduction to the Eclipse Hardware Modules
There are several modules in the Eclipse Series. They are all supported by the Eclipse
Ethernet Software 2.1. For simplicity’s sake they will all be referred to throughout this
document as the Eclipse, unless there is a need to refer to a specific module.
The Eclipse CX is a complete colorist control surface. It has trackballs, rotary encoders,
buttons and displays useful for controlling color grading applications such as Apple
Color™. It also has transport controls, a keypad for locating and a time-code display.
Eclipse CX
The Eclipse CX Midnight is functionally similar to the Eclipse CX, except that it has a
darker, “Midnight” finish, and white LEDs and indicators to reduce light emissions and
intrusion on colorist’s eyes. It also has Reset buttons next to the six rotary encoders on
the left side so you can easily return any parameter to its default setting.
Eclipse CX Midnight
Eclipse Ethernet Software
7