JLCooper Eclipse Ethernet 2.6 for OSX - Manual (Page 56)

Displays
The Eclipse has three displays, referred to in the software as the Left, Center and Right
displays, and a Timecode display. The Left, Center and Right displays are each have
two lines. Each line is treated like a separate display. You can assign functions to these
displays in much the same way as you assign actions to controls.
NOTE: If you are using an application that communicates with the Eclipse via MIDI,
Developer Mode or Raw Ethernet, you should probably not assign any functions to the
displays in the keyset for that application. The application will probably be writing its
own information to the displays.
When you click on a display to select it, information about it appears in the Inspector
window. This information includes an assigned Name, a description of the function
assigned to the display and Tabs which contain controls for editing the display’s
function.
For the Left, Center and Right displays, the available Tabs are Text, Encoder Names
and Emulation.
Eclipse Ethernet Software
53