JLCooper Eclipse Ethernet 2.6 for OSX - Manual (Page 24)

There are two versions of the Eclipse MX Eight Channel Expander - one that connects
to an Eclipse CX, and a standalone version, known as the MX-SA. If you are using an
Eclipse MX-SA, you need to click on the Using Standalone Eclipse MX (MX-SA)
checkbox.
Click on Apply to accept your changes. At this point, the Eclipse should be
communicating with your Mac, and moving controls on the Eclipse should highlight the
onscreen version of those controls in the Eclipse software. A small icon in the menu bar
to the right of the Help Menu will be green if a successful connection has been
established. It will be gray if there is no connection or the connection has been lost.
If the connection is lost for some reason (ethernet cable unplugged, MCS-3000 power
cable dislodged), the software will attempt to re-establish the connection on its own. If it
is unsuccessful, clicking on the gray icon and choosing reconnect will usually restore
the connection.
Eclipse Ethernet Software
21