Leprecon LP-2000 - Manual (Page 43)

43
Color Sets - Resetting Color Sets, or Palettes, sets all to default
values, which should give the user a good starting point from
which to program custom pallettes.
Chan. Types - Resetting Channel Types returns every console channel to
normal intensity control.
All Patches - Erasing all SoftPatches resets all patch names to
factory defaults, and sets each dimmer circuit to the console
channel of the same number. Other dimmer circuits are assigned
to console channel 0, thus disabling all output levels.
All Scenes - Erasing All Scenes returns all channel levels in each
scene to zero intensity. Note that if a channel is set to
control color changers, it will not be affected by erasing All
Scenes. To clear this data as well, first reset Chan. Types,
then erase All Scenes.
All Chases - Erasing All Chases sets the levels in each chase step to
zero intensity. The chase lengths are set to 0 steps, the chase
rate is set to a medium speed, and the chase direction is set to
Reverse.
EVERYTHING - Erasing EVERYTHING performs all of the above functions,
returning the console completely to its factory defaults.