Leprecon LP-2000 - Manual (Page 47)

47
(3) In the bottom of the console are the analog output decoder cards.
The printed circuit board closer to the power supply is the UART
board, and it contains two trim pots labelled TR1 and TR2. TR2
is the adjustment for the minimum output voltage, which should be
adjusted with the channel 1 fader fully down. Likewise, TR1 is
used to adjust the maximum level, and should be adjusted with the
channel 1 fader and Master fader fully on.
(4) When adjustments have been completed, reassemble the console and
replace the trim strip.
WARRANTY INFORMATION
CAE will repair any defects in materials or workmanship on the LP-
2000 and LP-2000 Cue Plus consoles for a period of one year from the
date of sale. The equipment must be returned postpaid to the factory,
and CAE will pay return shipping charges. CAE is not responsible for
incidental damages, or for damage as a result of misuse or abuse. It
is the responsibility of the owner to determine the suitability of the
console for any specific application.
Any return to the factory must be authorized by our service
department. Do not return any equipment without first calling for an
authorization number. The CAE service department may be reached at
(313) 231-9373 during business hours, or a message may be left after
hours. Our fax number is (313) 231-1631.