MacroSystem PIP-Studio - Manual (Page 36)

7 . 2
2.) Background: If you selected Double 1 or
Double 2 mode, the Background button will
be activated.
If you click on it, the Select Pattern window
opens and you can choose a background for
the two PIPs. You will already be familiar with
this Select Pattern window from the Titling
screen or from the New Scene (Pattern)
menu.
If you want to set a monochrome back-
ground, select the type Monochromatic and
then the first entry in the list (No Pattern) and
finally open the color box using Color. Both
scenes will be displayed as small PIPs in
front of this background.
3.) Size: If you click on the Size button, the
PIP will become active and you can adjust its
size by moving the trackball. Rolling the
trackball to the left shrinks the PIP, rolling it
to the right makes it grow in size.
To apply the new size setting, click on the left
trackball button. Click on the right trackball
button if you want to reset the PIP to the
previous size setting. Please note that for
technical reasons the PIP is displayed as a
rectangle while its settings are being config-
ured.
4.) Position: You can use the Position button
to change the position that the PIP should be
in during its hold-time and at various
waypoints. In this case too, the PIP is dis-
played as a rectangle while its settings are
being configured. This function also allows
you to place the PIP outside the visible
screen area. As soon as you move the pic-
ture off the screen (i.e. as soon as one of the
coordinates becomes less than or equal to
0), a new screen view is displayed giving you
a complete overview of the PIP’s current
position off the screen.