MacroSystem PIP-Studio - Manual (Page 5)

1 . 1
General
Thank you for purchasing PIP-Studio from
your Casablanca dealer.
We would like to thank you for placing your
confidence in this product and hope that it
will fulfill all of your expectations.
PIP-Studio enhances the power of your
Casablanca system.
Please do not hesitate to contact us if you
have any further questions or wish to provide
us with suggestions for improvement. To do
so, please use the address and/or telephone
number printed in your Casablanca Avio or
Casablanca Kron (hereafter referred to col-
lectively as “Casablanca II”) manual.
We kindly ask you to provide the serial num-
ber of your unit or your customer number
whenever you contact us.
Installation
PIP-Studio must be installed on your Casa-
blanca II before you can use it.
To do so, you will need at least version 1.6 of
the Casablanca II system software.
You can look up your system version using
the information item in the “System Settings”
screen (bottom left of the screen).
Leave your Casablanca powered on and, in
“System Settings,” select the “Install Product”
button to open the corresponding window.
Now insert the SmartMedia software installa-
tion card into the Casablanca’s SmartMedia
drive. When you insert it, make sure the
gold-colored contacts are facing downwards
and the clipped-off corner is pointing towards
the front and left (i.e. towards the Casa-
blanca II).
Push in the card until only around half a
centimeter remains protruding from the unit
and you feel some resistance. You will now
see the PIP-Studio program listed in the
window.
Select it in the list and click on “License” (or
“Show” if you are running a demo version).A
numerical keypad will enable you to enter the
license code that you acquired from your
dealer. A message will then inform you that
the installation process is complete. You can
now remove the SmartMedia card
.