Caution, 3) installation, Power it off. otherwise, injury could occur – MBM Corporation AEROCUT G2 User Manual
Page 11
Advertising
10
Waste box
Chute
Screws
Unlock
Lock
Screws
Chute guide
(3) Installation
1.
The
machine installation method
Please be sure to LOCK a caster brake after making it move to the target position, when
installing a machine.
Caution
When you install a machine, please install to a place with no dust,
and the place which is not influenced with a liquid. It becomes the
cause of failure if the installation method is mistaken.
2. How to remove accessories
① Loosen the screws to remove the chute guide.
② Remove the chute screws.
③ Lift the chute and take out the waste box.
④ The accessory case is inside the waste box.
⑤ Reposition the chute guide.
Caution
Power it off. Otherwise,
Injury could occur.
Advertising