MBM Corporation AEROCUT G2 - Manual (Page 44)

４３
(3) Details concerning errors
① Paper size error
Correct the paper size to fit in the value range below.
② Final cutting measurement error
Correct the final cutting measurement to exceed the value specified below.
③ Cutting measurement error
Correct the cutting measurement to fit in the value range below. The maximum value is
subject to change depending on the entered paper size.
④ Cut piece number error
Correct the number of cut pieces to be in the value range below. The maximum number of
pieces is subject to change depending on the operation .
⑤ Bottom margin error
Correct the bottom margin to fit in the value range below.