Caution, 12) how to attach the perforator, Power it off. otherwise, injury could occur – MBM Corporation AEROCUT G2 User Manual
Page 19
Advertising
18
(12) How to attach the perforator
① Power it off.
② Be sure to hold the perforator with both hands and attach it as shown in the figure.
③ Attach it in such a manner that the projection is positioned as shown in the figure.
④ Fix at 2 spots with knurled head screws.
⑤ The target paper weight for the perforator is
65 lbs (Cover stock) [176 g/㎡]
or less.
Caution
Power it off. Otherwise,
Injury could occur.
The maximum paper weight for use is 65 lbs (Cover
stock) [176 g/㎡] for the perforator. Using a heavier
paper may cause a paper jam or a mechanical
failure.
Combined use of the perforator and creaser may
cause a paper jam or a mechanical failure
Perforator
Projection
Knurled head screw
Knurled head screw
Advertising