MBM Corporation AEROCUT G2 - Manual (Page 22)

２１
(14) How to adjust the depth of perforation
① Change in the paper thickness, recommend you adjust the depth of Perforation.
② The height of the upper blades can be individually adjusted.
③ Remove the perforator by reversing the procedure described in (12) (How to attach the
perforator).
④ Shift the perforator lock lever to the right and raise the upper blades.
⑤ Adjust a height adjustment screw in the up direction if it is cutting into too deeply, and in the
down direction if not cutting into sufficiently.
Up=Shallow
Down=Deep
Caution
Avoid contacting the cutting edge of the
perforating blade. Otherwise, injury could occur.
Shallow
Deep
Height adjustment screw
Perforator lock lever
Perforator cartridge cover
Knurled head screw