13) how to adjust the perforation location – MBM Corporation AEROCUT G2 User Manual
Page 20
Advertising
１９
(13) How to adjust the perforation location
① When using the perforator, the screen will display where to fix the perforator, as shown
below.
② If the upper blades are positioned to come into contact with the lower blades, the upper
blade position can be adjusted with the perforator attached to the main body.
③ Shift the perforator lock lever to the right. Loosen the clamp levers, move the perforator to
the desired position based on the scale, and tighten the clamp levers firmly.
④ Shift the perforator lock lever to the left to finish this adjustment.
Perforator lock lever
Scale
Clamp lever
Upper Blade
Advertising