10) setting of slitter and feed table, 11) operation number cancellation – MBM Corporation AEROCUT G2 User Manual
Page 38
Advertising
37
(10) Setting of slitter and feed table
① By pressing SET, the feed table will be lowered to the bottom dead point and the slitter will
move to the operating position.
② The display will change from SET to START upon completion.
(11) Operation number cancellation
① The total number of processed sheets are counted. Press CLR and hold to clear the
number. You can change the
Total number.
Operation
Screen
Operation
Screen
Total number of
operated sheets
You can make a little adjustment on
Total number.
Advertising