Montigo RP620 - Manual (Page 34)

RP620 Power Vent Indoor Gas Fireplace
Page 34
XG0777 - 122014.1
Installation
Firestone / Fireglass Installation
The RP620* is supplied with eight 3 lbs bags of glass firestones. Once
the trim and glass door is removed, place the firestones randomly
around the burners as shown in Figures 23 and 23a. Fireglass
installation is the same as firestones.
Note: DO NOT cover the pilot with firestones or any other
media.
Figure 31. Place one layer of firestones in burner tray
Figure 31b. Completed firestone installation
Optional Speckled Stones
The RP620* has the option of installing the Speckled Stones which
mimic real stone. These may be spaced evenly across the burner
and/or light tray. See the Montigo web site for photographs and ideas.
www.montigo.com
Section 10: Installing Accessories
Figure 31a. Do not place any firestones on top of the pilot cover.
Do not operate this fireplace without the glass doors or with a broken glass door.
NOTICE
The RP620* requires 2 sets of Speckled Stons (RR150SS) to cover
the burner and an additional 2 sets to cover the light tray.
Note: DO NOT cover the pilot with Speckled Stones or any
other media.