Montigo 30FID Traditional - Manual (Page 36)

Page 36
XG00516- 150204
I-Series Indoor Gas Fireplace
Installation
Porcelain Panel Installation
The 30FIDV-LGS must only be used with the Firebox Panels
installed. With the Fireplace Door removed, the panels can be
easily installed.
1). Make sure all the Porcelain Panels and fasteners are received
in good order.
Figure 7 Sec.9
Figure 8 Sec.9
2). The back of the porcelain panels have insulation. Make sure
insulation is in good order. Without insulation you may experience
pilot stability issues.
Figure 9 Sec.9
3). The porcelain panel kit comes with replacement panel retainers.
Use if necessary. See figure for panel retainer location.
Figure 10 Sec.9
5). Carefully slide the right panel along the right side of the firebox
leaving enough room to slide the rear panel behind it. Take care
to not scratch the firebox paint.
Figure 11 Sec.9