Montigo 30FID Traditional - Manual (Page 38)

Page 38
XG00516- 150204
I-Series Indoor Gas Fireplace
Installation
Log Installation
The 30FIDV-LGS uses cast ceramic logs for exceptionally high definition and realism. The ceramic is fragile and can be easily scuff
or chip the logs. The inside of the logs are purple so you want to take care to not damage them. Each log has specific locating details
such as pins, posts or embers to line up with. Follow the images provided to ensure proper operation and flame pattern.
Figure 16 Sec.9
1). Inspect the logs as received for any shipping or handling damage.
Figure 17 Sec.9 Burner as shipped Figure 18 Sec.9 Ceramic baffle installation
2). Place black ceramic air baffle on the left side of the firebox. The profile of the burner continues on the ceramic log baffle.
Figure 19 Sec.9 Log 2 installation
3). Place first log on top of the ceramic pin, see figure 18c. Pull first log forward so that it bumps up against the ceramic embers
and the ceramic air baffle, see figure 18d.
Figure 20 Sec.9 Log 2 installation