Montigo 30FID Traditional - Manual (Page 62)

Page 62
XG00516- 150204
I-Series Indoor Gas Fireplace
Maintenance
12). Attach the Pilot line back into the valve, being very careful not
to over-tighten the line.
13). Feed the 2 electrical wires in between the shell of the unit and
the Control Board and plug them into the appropriate terminals on
the control board.
14). Tie up excess wires and zap strap. Take care to not pinch or
kink wires and pilot gas line.
15). Reverse these steps for reinstallation. Re-connect Gas and
Electrical supply.
Figure 65 Sec.10