Montigo 30FID Traditional - Manual (Page 55)

Page 55
XG00516- 150204
I-Series Indoor Gas Fireplace
Maintenance
Figure 36 Sec.10
6). Cut the Zip Strap holding the Fan Wire Harness.
7). Cut the Zip Strap that holds the Fan Wire Harness in the Valve
Compartment.
Figure 37 Sec.10
8). Disconnect the Fan Wire Harness.
Figure 38 Sec.10
9). Disconnect the Fan Wire Harness at the back as well.
Figure 39 Sec.10
10). Remove 3 screws that mount each fan in place.
Figure 40 Sec.10
11). Remove the Blowers from the Fireplace.
Figure 41 Sec.10