Omnia Audio Omnia.ONE - Manual (Page 131)

112
Livewire
Disable Livewire
When clicked on, gives the option to disable Livewire. This is needed if you will be connecting
the Omnia’s Ethernet network jack to a non-Livewire network.
<-Exit
Click on this option to return to the Discrete I/O submenu.
Bypass
Process
The normal setting.
Bypass
Completely bypasses all processing and I/O controls.
Save IO Config
I/O settings are those that affect the audio input and output configuration and allow correct
interface with the rest of the airchain / external equipment.
“Save IO Config” saves all user settings within the Input/Output menu to the system’s non-volatile
memory as named configuration presets. Use this to save your I/O configuration as the system default or
save more than one configuration if the unit will be used with different external equipment configurations.
These saved configurations can be recalled using the “Load IO Config” option.
To save an IO
configuration proceed as follows:
Highlight “Save IO Config” and click. “Name” will be highlighted and the Name field will display
“<none>” if no previous configurations have been saved or it will automatically display the currently
loaded configuration’s name. If you wish to overwrite this existing configuration with your changes, just
rotate the jog wheel clockwise to highlight the Save button and click. Your changes will be saved to the
existing configuration preset.
If instead, you wish to save your changes as a new configuration preset with a different name, click the jog
wheel while “Name” is highlighted and the editing cursor will appear, highlighting the first character of the
existing preset name. This is “select” mode. (If no previous configurations were saved, “<none>” will
vanish and be replaced by the editing cursor.)
If an existing preset name is present, you can scroll left and right through its text by rotating the jog wheel
knob. Be careful not to scroll clockwise past the blank space just after the last character in the name or
“select” mode will be cancelled. If this happens, simply rotate the knob counter-clockwise until “Name” is
highlighted and click to re-enter “select” mode.
When you reach the character you want to edit, click. This puts the cursor in “edit” mode. You can now
change that character by scrolling through the character list with the knob. When the desired character is
found, click. This will return the cursor to “select” mode and you can again turn the knob to select the next
character to edit.
-To delete a character... Select the character to be deleted, click, choose the " < " symbol and click again to
delete that character. Characters can only be deleted one at a time.
-To insert a character between 2 existing characters... Select the character just after where the new character
is to be inserted, click, choose the " ^ " symbol and click again. The new character appears. Now rotate the
knob to select the desired character for it and click to accept. (Note that this inserts a new character before
the one selected, and keeps the originally selected character intact as what it was before choosing "^")