Omnia Audio Omnia.ONE - Manual (Page 132)

113
When you are finished, simply rotate the knob clockwise with the cursor in “select” mode until the Save
button is highlighted and click to save the configuration preset.
-To cancel at any time without saving… With the cursor in “select” mode, rotate the knob clockwise until
Cancel is highlighted and click.
Load IO Config
This option allows you to select and load a previously saved IO configuration.
To load a saved IO configuration, highlight “Load IO Config” and click. Rotate the jog wheel until the
desired IO configuration is displayed and click. To exit without loading a configuration, rotate the jog
wheel until *cancel* is displayed and click.
Delete IO Config
This option allows a previously saved IO configuration to be deleted.
To delete an IO configuration highlight “Delete IO Config” and click. Rotate the jog wheel to display the
IO configuration to be deleted. Click the jog wheel and that named configuration will be instantly deleted.
To exit without deleting a saved configuration, rotate the jog wheel until *cancel* is displayed and click.
Rename IO Config
This option allows a previously saved IO configuration to be renamed.
To rename an IO configuration highlight “Rename IO Config” and click. Rotate the jog wheel to display
the IO configuration to be renamed and click. Enter the new configuration name as described above in the
Save IO Config section. To exit without renaming a configuration, rotate the jog wheel until *cancel* is
displayed and click.
<-Exit
Click on this option to return to the Main Menu.
Administrative
About
Presents a dialog displaying the Omnia.ONE software style, firmware release version and front
panel software version currently active in the unit.
Contrast
Adjusts the contrast of the front panel LCD display to optimize it for various viewing angles.
Network Configuration
Allows customization of the network interface configuration. Available parameters are:
IP (IP Address)
Accepts data in the form of four octets to describe the Ipv4 network address assigned to
the Omnia.ONE’s network interface. The entries have the form of:
[ octet] . [ octet] . [ octet ] . [ octet] which when entered may appear as a network address such as:
192 . 168 . 0 . 200