Omnia Audio Omnia.ONE - Manual (Page 138)

119
Remote Control Methods:
External Modem or 10/100BaseTX Ethernet.
--Modem (support not yet available as of software version 2.2): User-supplied Hayes
command compatible external serial modem connected to rear-panel DB-9 male serial
port.
-- Ethernet: TCP/IP control via web page interface and Java (TM) remote control
program included in the web pages. All software is served from the built-in web server;
there is nothing to install on the user's computer.
Ports Used: The defaults are TCP Ports 4545 and 4546 (for control and metering data,
respectively).
Connectors: Modem port - EMI-suppressed DB-9 male connector.
Ethernet - Industry standard EMI-suppressed RJ-45 connector.
GPI Interface:
Connector: EMI suppressed DB-9 female connector.
Power Requirements:
Voltage: 100-250 VAC, 47-63 Hz., Less than 40 VA.
Power Connector:
EMI suppressed IEC male.
Detachable 3-wire power cords supplied for US and European use.
Power Supply:
Internal. Overvoltage and short circuit protected. Meets EN55022, EN55011 Level B
Conducted Emissions. EN61000-4-2, -3, -4, -5, -6 level 3 immunity compliant. Full
international safety approval. CE marked.
Environmental:
Operating Temperature: 32 to 122 deg. F / 0 to 50 deg. C for all operating
voltage ranges. Humidity: 0-95% RH, non-condensing.
Dimensions:
19" wide x 1.75" high x 16" deep (48.26cm wide x 13.335 cm high x 40.64 cm deep)
including connectors. Unit requires one EIA rack space for mounting.
Shipping Weight:
12 lbs. / 5.5 kg
StudioHub
 is a registered trademark of Radio Systems.
Telos/Omnia Research and Development is constantly working to improve the quality of our products.
Actual specifications are subject to change or improvement without notice.