Omnia Audio Omnia.ONE - Manual (Page 73)

54
[Mono L+R] - Configures the DSP processing chain to have both the Left and Right internal
channels fed from the sum of the Left Channel and Right Channels of the input source selected.
Note that this selection is active in all sources selected as Primary and Secondary (Failover) audio
sources.
[SWAP] - Configures the DSP processing chain to swap the Left and Right internal channels, that
is, the DSP Left Channel is fed from Right Channel input and the DSP Right Channel is fed from
the Left Channel input. Note that this selection is active in all sources selected as Primary and
Secondary (Failover) audio sources.
<-Exit
Click on this option to return to the Discrete I/O menu.
Output
These adjust the discrete outputs that can be used for monitoring or relaying to another stereo generator..
<-Exit
Click on this option to return to the Discrete I/O submenu.
Anlg Level
Adjusts the master peak analog output level of both channels over a range of -2.0 dBu to 22.0 dBu
in 0.1dB steps.
Right Trim
Adjusts the level of the right channel output only over a range of +/- 3.0dB in 0.1dB steps.
AES Level
Adjusts the master AES/EBU peak digital output of both channels over a range of -24.0 dBFS to
0.0 dBFS in 0.1dB steps.
Right Trim
Adjusts the level of the right channel input only over a range of +/- 3.0dB in 0.1dB steps.
Samp. Rate (Sample Rate)
Adjusts the AES/EBU output sample rate. Choices are 48k (internal 48kHz clock), Input (locks to
the sample rate clock of the AES/EBU input signal) or Ext (locks to the sample rate of an
AES/EBU signal applied to the external Sync input.
LW Level
Adjusts the master peak Livewire output level of both channels over a range -24.0 dBFS to 0.0
dBFS in 0.1dB steps.
Right Trim
Adjusts the level of the right channel input only over a range of +/- 3.0dB in 0.1dB steps.
Ana De-emph (Analog output De-emphasis)
When On provides a de-empasized analog output suitable for monitoring. Off passes the input
signal through without de-emphasis.
AES De-emph (AES/EBU output De-emphasis)