Orion System System Manager TS II In-House - Manual (Page 29)

SMTS II Technical Guide
VCM & VCM-X Controllers
29
Has Demand Ventilation Control
Select this item if the HVAC unit has demand ventilation control.
Condenser HP Module Installed
Select this item if the HVAC unit has split condensers.
VCM & VCM-X Confi guration
Figure 41: VCM-X Confi guration Screen 7
Setpoints for Unit 0102 Configuration Page 7 of 14
Has Demand Ventilation Control
Condenser HP Module Installed
Broadcast Real Time Clock to VAV Boxes
Select this item to have the HVAC unit broadcast the real time clock to
all controllers on its local loop. This broadcast sends the time from the
VCM-X’s Internal Time Clock to all controllers on its local loop. This
broadcast needs to be confi gured on a VAV or Zoning System using the
VCM-X with Orion VAV/Zone controllers. A network communications
device is required in order for this feature to operate, but can also be
used to synchronize all controllers on the local loop
Broadcast Supply Air to VAV Boxes
Select this item to broadcast the VCM-X’s Supply Air Temperature to
all controllers on its local loop. This broadcast needs to be confi gured
on a VAV or Zoning System using the VCM-X with Orion VAV/Zone
Controllers. A network communications device is required in order for
this feature to operate.
Broadcast AHU Schedule to VAV Boxes
You must select this item if you have VAV/Zone controllers connected
to the VCM-X controller. This will broadcast the Occupied and Unoc-
cupied Schedule of the VCM-X controller to all VAV/Zone controllers
on the local loop.
Broadcast Main Fan and Heat Status to VAV Boxes
Select this item to broadcast the VCM-X’s Supply Fan and Heating
Status to all controllers on its local loop. This broadcast needs to be
confi gured on a VAV or Zoning System using the VCM-X with Orion
VAV/Zone Controllers. A network communications device is required
in order for this feature to operate.
Figure 42: VCM-X Confi guration Screen 8
Revised 4/21/15