REMKO Multi-talent - Manual (Page 19)

Designation Value range Factory setting Description
Max warm up-time 00:00-03:00 02:00
Setting the time by which the heating start should as
a maximum be brought forward (maximum bringing forward).
Reduction opt 00:00-03:00 00:00
Automatic optimisation of the switch-on time of the heat
pump at the end of the set heating period.
The heat pump is no longer started if it is not already in
operation for the duration of time set here prior to the end
of the heating period (only for the last heating period) (see
time programme
heating circuit 1/2 prog 1/2). (This
prevents short-term warming up of the heat pump at the
end of the heating period).
PC enable 0000-9999 0000 Code number to allow access to the heating circuit data via PC.
Heating circuit 1/2-continued
Level 4 - USER - Description of parameters and settings - continued
19