Super Systems SuperDATA Load Entry User Manual
Page 58
SuperDATA Standard Load Entry Operations Manual
Super Systems Inc.
Page 58 of 58
The Recipes options tab provides options for
enabling or disabling SSi Recipes and
Honeywell Recipes. SSi Recipes may be
imported from Configurator and may also be
printed.
By default, SSi Recipes is enabled and
Honywell Recipes is disabled. If both are
enabled, one tab in the main menu will read,
“SSi Recipes”, and the other will read
“Honeywell Recipes”. If only one is enabled,
there will simply be a “Recipes” tab at the top
of the main menu containing recipes for the
enabled recipe type.
The Workstation options tab includes options
for enabling or disabling Workstation mode
(“Is Workstation”) and, when Workstation
mode is on, setting up which furnaces the
workstation can control loads for.
By default, Workstation mode is disabled.
At this point, the initial setup is ready and Standard Load Entry is ready for operation. More
details on operating Standard Load Entry can be found in the Operation section on page 30.