Tech Source Raptor 4000 Series (for Linux) - Manual (Page 10)

Raptor 4000 Series: Reference Manual
©2009 Tech Source Inc. 4 Part #65-0271-01
available PCI slot, and remove the bracket and
screw. Ground yourself by touching the metal
part on an unpainted section of the metal case.
Step 2:
Install the Raptor graphics card firmly into the
PCI slot. Take care to press it evenly and
snugly into the slot. Once you are certain the
card is installed properly in the slot, secure it
with the bracket screw.
Step 3:
Secure the system cover, attach any previously
removed cables, and connect the video cable
card to your monitor.
The Raptor graphics card is now installed and the system is
ready for software installation. Please refer to Chapter 3 for
installing and configuring the software.