Tech Source Raptor 4000 Series (for Linux) - Manual (Page 16)

Raptor 4000 Series: Reference Manual
©2009 Tech Source Inc. 10 Part #65-0271-01
Section "Module"
Load "dbe"
Load "extmod"
Load "MOX" # TSI MOX Extension
Load "TSIMISC" # TSIMISC Extension
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
For more information about TSIMISC please contact Tech Source
for a technical white paper.
3.6 New Device
Upon initial installation of a Raptor 4000 series card, new device
names are created in the
/dev
directory for each head. It is
denoted by
rapafp#
for each card where
#
represents an
instance number assigned by the operating system.
For example,
/dev/rapafp0
is the first head seen by the system,
/dev/rapafp1
will be the second head seen by the system.
NOTE: Only the first
“Device”
and
“Screen”
sections are
automatically added to the
“xorg.conf”
file by the Raptor 4000
series installation software. Subsequent relocation(s) of the first
Raptor 4000 card and/or additional Raptor 4000 cards being
added to the system will require the user to manually add and
configure these sections to the
“xorg.conf”
file per device
instance. See section 4.5 for more details.