Tech Source Raptor 4000 Series (for Linux) - Manual (Page 7)

Raptor 4000 Series: Reference Manual
©2009 Tech Source Inc. 1 Part #65-0271-01
1 Introduction
1.1 Overview
Thank you for purchasing a Tech Source, Inc. Raptor graphics
card for use with your x86 PC workstation/server. This manual
describes the installation and configuration of the Raptor
graphics card and the Linux drivers for the Raptor 4000 Series
product.
This software runs on x86 PC workstations/servers and supports
kernel versions 2.4 and 2.6. For support of another kernel,
please contact Tech Source at:
[email protected].
The following products are supported:
• Raptor 4000 Supports 2048x2048 resolutions (digital
and analog) on a PCI bus.
• Raptor 4000e Supports 2048x2048 resolutions (digital
and analog) on a PCI Express bus.
• Raptor 4000-LR Supports 1920x1200 resolutions (DVI-
Single Link digital and analog) on a PCI
bus.
• Raptor 4000e-LR Supports 1920x1200 resolutions (DVI-
Single Link digital and analog) on a PCI
Express bus.
• Raptor 4000-R Supports 2048x2048 resolutions (digital
and analog) with hardware rotation on a
PCI bus.
• Raptor 3500e Supports 2048x2048 resolutions (digital
only) on a PCI Express bus.