Tech Source Raptor 4000 Series (for Linux) - Manual (Page 3)

PREFACE
This publication documents the Tech Source Raptor Drivers for
Linux Installation for use with the Tech Source, Inc. Raptor
graphics cards. This manual is intended for users who
incorporate the Tech Source Raptor graphics cards into x86 PC
workstations/servers.
This is a guide to the installation of the Raptor Drivers for Linux
software. All systems vary to a degree. Knowledge of the
features of your system is helpful during the installation process.
WARRANTY
The Raptor cards are warranted for two (2) years from date of
shipment. During the warranty period, Tech Source, Inc. will, at
its discretion, repair or replace a defective component at its
expense. Freight charges associated with the repair or
replacement of components under warranty are to be shared by
Tech Source, Inc. and the customer. All customers, domestic
and international, shall bear the freight charges for the product
return. Tech Source, Inc. shall bear the outbound freight
charges up to $20.00 (USD) per returned product, whether
domestic or international. Any additional freight charge shall be
the responsibility of the customer. We suggest that you contact
your dealer first with any questions you may have about the
product. Technical support (via telephone/facsimile/email) is
provided for one (1) year from date of shipment. The installation
of any Tech Source, Inc. hardware/software product is the sole
responsibility of the customer.
Tech Source, Inc. offers a continuing hardware/software support
program that provides telephone consultation and any required
hardware repair after the expiration of the warranty period. This
is a billable annual maintenance contract. Contact Tech Source,
Inc. for the available maintenance plans.
Customers will be charged an hourly rate plus materials
($350.00 USD minimum) for repairs and/or maintenance
performed by Tech Source, Inc. that are not covered by a Tech
Source, Inc. warranty or maintenance contract.