Tech Source Raptor 4000 Series (for Linux) User Manual
Page 13
Raptor 4000 Series: Reference Manual
©2009 Tech Source Inc.
7
Part #65-0271-01
4. If the CD-ROM is not already mounted, type:
prompt#
mount /dev/cdrom /mnt/cdrom
Type the appropriate command as outlined in step 3.
5. The packages are in Red Hat's RPM format. For
information on downloading, installing, and using the RPM
utility, please refer to Red Hat's website and the related
FAQ and HOWTO.
To install the driver package on kernel 2.4, type:
prompt#
rpm -Uvh
rapafp-*.rpm
To install the driver package on kernel 2.6, type:
prompt#
rpm -Uvh
rapafp6-*.rpm
6. Reboot the system to make sure the drivers will be
reloaded.
7. To verify that the device drivers were loaded correctly,
type:
prompt#
cat /proc/modules | grep rapafp
The output should show the entry for the Raptor device
drivers similar to the following:
rapafp_mod 39152 0 – Live 0xf8bbf000
8. To install the MOX package, type:
prompt# cd /mnt/cdrom/mox/
prompt#
rpm -Uvh
tsimox-*.rpm