Tech Source Raptor 4000 Series (for Linux) - Manual (Page 15)

Raptor 4000 Series: Reference Manual
©2009 Tech Source Inc. 9 Part #65-0271-01
Installation and configuration of MOX software is discussed
throughout this chapter. The MOX software must be installed only
once. The software can be found in the MOX directory on the
cdrom. In the example below, the MOX software automatically
modifies the
“Module”
Section in the
xorg.conf
file.
Section "Module"
Load "dbe"
Load "extmod"
Load "MOX" # TSI MOX Extension
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
For more information about MOX, please contact Tech Source for
a technical white paper.
3.5 TSIMISC Extension Support
This extension provides various additional functionalities that are
not included within the regular Xserver. Current implementation of
TSIMISC extension enables a user to constrain the cursor to a
particular screen.
The software can be found in the tsimisc directory on the cdrom.
Upon installation of extension package the
xorg.conf
file gets
updated so that the TSIMISC extension is loaded when the X
server starts. In the example below, the TSIMISC software
automatically modifies the
“Module”
Section in the
xorg.conf
file.