Tech Source Raptor 4000 Series (for Linux) - Manual (Page 34)

Raptor 4000 Series: Reference Manual
©2009 Tech Source Inc. 28 Part #65-0271-01
The following example shows the
8+24
mode being selected for a
Raptor 4000 card. The
"Mode"
option is set to “
8+24
”.
Section "Device"
Identifier "Rapafp0"
Driver "rapafp"
BusID "PCI:41:0:0"
Card "TSI Raptor 4000"
Option "Device" "/dev/rapafp0"
Option "Mode" "8+24"
Option "ScaleCursPos" "on"
Screen 0
Option "Head" "0"
# Option "DDCCheck" "off"
# Option "Rotation" "+r"
# Option "Sync" "sx"
# Option "BackingStore"
# Option "SaveUnder"
# Option "TranspColor" "0x0a3246"
EndSection
The following example shows the
mox24
mode being selected for
a Raptor 4000 card. The
"Mode"
option is set to “
mox24
”.
Section "Device"
Identifier "Rapafp0"
Driver "rapafp"
BusID "PCI:41:0:0"
Card "TSI Raptor 4000"
Option "Device" "/dev/rapafp0"
Option "Mode" "mox24"
Option "ScaleCursPos" "on"
Screen 0
Option "Head" "0"
# Option "DDCCheck" "off"
# Option "Rotation" "+r"
# Option "Sync" "sx"
# Option "BackingStore"
# Option "SaveUnder"
# Option "TranspColor" "0x0a3246"
EndSection
The following example shows the
mox32
mode being selected for
a Raptor 4000 card. The
"Mode"
option is set to “
mox32
”.
Section "Device"
Identifier "Rapafp0"
Driver "rapafp"
BusID "PCI:41:0:0"
Card "TSI Raptor 4000"
Option "Device" "/dev/rapafp0"