Tech Source Raptor 4000 Series (for Linux) - Manual (Page 35)

Raptor 4000 Series: Reference Manual
©2009 Tech Source Inc. 29 Part #65-0271-01
Option "Mode" "mox32"
Option "ScaleCursPos" "on"
Screen 0
Option "Head" "0"
# Option "DDCCheck" "off"
# Option "Rotation" "+r"
# Option "Sync" "sx"
# Option "BackingStore"
# Option "SaveUnder"
# Option "TranspColor" "0x0a3246"
EndSection
4.6.2 MOX Modes
MOX (Multiple Overlay Extension) provides support for multiple
drawing layers on graphics cards. MOX is available on all Raptor
cards with the exception of the Raptor 3500e card. Details about
MOX can be obtained in a technical white paper available
separately from Tech Source.
The following MOX modes are supported on the Raptor 4000
Series cards.
mox24
MOX, 8-bit Normal, 21-bit Group, 13-bit Absolute
mox32
MOX, 8-bit Normal, 32-bit Group, 24-bit Absolute
4.7 Setting Resolution on Raptor 4000 Series
Cards
By default, the Xserver will pick up the resolution specified by
DDC. If the attached monitor is not DDC capable, it will pick up the
resolution specified in the
xorg.conf
file.
NOTE: MOX support is only available on the head closest to
the pci slot (Head0).